I'm guessing you have a 02-03? The 04-05 and the rsx use a different lower control arm cause they are 5 lug!
So i ordered the D2 LCA a while back. I have had time till now to actually install them but ran into a problem.
They dont line up.
Did I order the wrong ones?
I see how they would fit a DC5 (bolt pattern matches up)
Anyone else have these? Or am I just out of luck and sell em?
Last edited by Bobby; 12-29-2010 at 01:09 AM.
I'm guessing you have a 02-03? The 04-05 and the rsx use a different lower control arm cause they are 5 lug!
5 lug has absolutely nothing to do with it, there are 3 different bolt patterns for the rear LCA's depending on the application. Honda does not consider these to be a replaceable part and why they use the screwball 10 point torqxe bolt. The trailing arm and LCA are purchased as a single unit.
I have a set of RSX rear LCA's out in the garage as well. I also have a CRV lca that has the third bolt pattern(and the LCA's are all the same length).
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Looks like you already know this, but DC5 and EP3 bolt patterns are different on the LCA's.
AkA EX FULL-RACE EP3
Just crossed checked part numbers,
542-05-0210 is listed for:
02-04 RSX Type-S
05-06 RSX Type-S
02-04 RSX: 5-Speed
05-06 RSX: 5-Speed
02-04 RSX: Auto
05-06 RSX: Auto
02-06 Integra Type-R
And part number 542-05-0225 is for:
02-03 Civic Si
04-05 Civic Si
01-05 Civic
This is for the Skunk2 lca's, btw.
AkA EX FULL-RACE EP3
I have oem ep3 and rsx type s control arms in my garage, I will compare when I get home.
Same years as well (02)
No apologies necessary buddy! I was just checking for my own use too, I was hoping they were the same, as used RSX lca's are much more abundant.
AkA EX FULL-RACE EP3
You can just swap out for the entire trailing arm from a typeS. I have found them rather cheap at salvage yards and then clean them up, paint and swap out for ES bushings plus the new LCA's. Then you are not down forever and a day trying to do an install.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
So i spent some time looking at the Type-S trailing arms and seeing the difficulty of doing the swap but instead. I went ahead and ordered OMNI ones. I really just wanted to have Purple showing under the car.
Ill be posting pics soon.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks