Cusco will fit if your looking for aftermarket.
So today installed a DC Race header from a 05 type s along with the stock type s mid pipe all connected to the stock ep3 axleback. I had to leave the front sway bar off since the race header will not clear it. So what are my options for the front sway bar? I have read that the front sway bar from a 01-05 civic will fit, but are there any other choices? And where is the best place to purchase the em2 front sway bar or any other front sway bar that will fit?
Thanks,
Luke
Cusco will fit if your looking for aftermarket.
most people get that front sway off some junker in a salvage yard, I found one at my local yard (never used it) and paid $15, cause I pulled it off the car myself.
There should have been ZERO clearance issues with a DC rh and the stock front sway There is no difference between the DC5S and EP3 spec DC rh. A incorrectly lowered chassis could also cause the clearance issue.
If it is hitting, a set of aftermarket endlinks will reposition where the hump of the sway is located. the 03' EX sway will work nicely as well.
Last edited by Sucka; 12-20-2008 at 02:50 PM.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Just get a em2 sway bar or new endlinks to adjust the stock on like talon said!
Looks like I will be getting a set of after market endlinks, any brand that I should look at?
Last edited by Polish Thug; 12-31-2010 at 11:44 AM.
The corsportusa ones I heard are pretty good!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks