Every single bit of info I could find on the EDM/UKDM EP3 never gave any info on major wiring or schematics.
But I was given a hint, other than the fog light the combo switchs are the same internally, I had compared the EDM switch and the stock USDM one out of my car when I put it in and the wire for the fog switch is visually obvious to detect.
Last edited by talonXracer; 04-27-2011 at 08:02 PM.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
just finished wiring up my foglight, thought I would help ppl clarify things a bit. in this pic
the red dot on the left, thats the one that will go from the switch to the power source, and what i used for tapping into the power source
then i just wired everything else up by using the diagram provided. As for grounding at the light, I used the spot in my trunk that the previous owner used to ground his amp. The light looks awesome, ill post some pics when I find my camera.
Good stuff jukka, I'll be doing mine as soon as I have my car back. Already have the German stalk, wire ran from tail light to dash, bulb and pig tail in, need a relay and to install the stalk on the column.
where da PICS!!
did u use the momentary switch stalk?? If so, how did you wire it up?? I only found that you could wire it with like 5 relays or using latching relays.
Only pic I have no due to missing camera...
got a few more pics of my interior...
Fit sport foglight switch
and since I tapped into a constant 12v source that does not turn off when i cut the ignition, I wired up a indicator light to make sure i know its off when i shut down the car..
Nice !
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
SICK!Originally Posted by Jukka
Who made the CF piece to replace the pointless "vents"???
I thought I'd share this, since it's the only one I've seen like it:
^^ *Raised hand* Made it my self with some di-noc and a LED indicator light from painless wiring. That photo you posted tommy looks almost photoshoped.
that looks sooo clean!SICK!
I thought I'd share this, since it's the only one I've seen like it:
You did an awesome job!!!
That bish look factory!
I assure you that it's not Photoshopped. I have more pics of it (and other quite different stuff from this guys car), but I'll have to dig them up from whatever hard drive I have the rest of the pics on...
I remember finding it by using Google.co.uk.I haven't done that in a while. I'll have to add that and Google.jp to my 'I'm killing time, so what to-do?' list. lol
Agreed!
I've never really wanted one, but seeing this one has me on the fence with it...
I'd way rather have a white/clear one and I'd wire that ish to work with the reverse lights too.
I'm thinking that it's a front foglight from a different make/model, but IDK...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks