what electronical things do you have installed?
ok guys so i have no cluster lights or running lights in my tails or headlights.
i replaced the fuse and it worked for a couple hours.
same problem again so i think i have a short? anyone help me, i'm not very good with electrical issuses
what electronical things do you have installed?
PSN: theehuggybear
make sure you check all the other fuses as well. this happened to me, and i ended up having 3-4 blown fuses [some unrelated fuses as well].
anyone else help with this please?
headlights work, turn signals work, brake lights work, no running lights fuses blow the minute i turn the switch
yes i know i have a short but i have no idea where to look. is it possible that it is the switch itself?
I had this problem when i installed my hid's... i had to switch some wires around and it fixed the problem, but it seems like yours were working fine for quite some time. So what i would do is check for any loose grounds or positive wires that has to do with your hid instal. You never know something could have come loose or burnt up. It jsut takes one little wire to screw a whole bunch of crap up.Best of luck to you.
-Rob
Erm?
I am currently having the same problem. I cannot figure out what is going on... and i have a 12 hour drive in the next 24-36 hours that i need everything to be working....
I'm going to say the re-based HID bulbs you have or the ballast. If they were working for a a year with no problem, then either of those two. I head that HID kits go on ebay for 535
if it was something with the hid's though wouldn't i be shorting the fuses for headlights? my headlights/hid's are working fine. the fuse that keeps blowing is titled small light
I think is from the harness..my friend had this problem and we took the whole Hid harness we saw why it was doing it...two wires were rubbing against each other ...so check the whole harness and u might find the problem
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks