EM2 vs. EP3Si vs JDM EP3R spec Front Sway Bar Comparisons

[Paulieep3]

I have a k24a2 swap, would the 16mm em2 sway bar clear the header? what would be the best sway bar to have that will clear this setup.

[usedep3]

it depends on the header really. if you plan on running a front sway the thinner em2 sway offers the greatest clearance

[imthebro]

so just to confirm the 2003-2005 Em2 swaybar is the 16mm one and part # is 51300-S5D-A02 ?

I did a search on Hondapartscheap : http://www.hondapartscheap.com/south...ty40=1&qty42=1

is #5 the right one ? the last thing I want is to order the 23 mm em2 sway, I need the 16 mm to try and clear my headers.
Also, did you guys order em2 swaybar bushings or the stock ep3 ones fit ?

[bchaney]

Just posted this in another thread...

The 15.9mm EM2 front sway is P/N 51300-S5D-A02. I have one sitting in my living room

You need the 15.9mm bushings to go with the 15.9mm bar.

[udontknowjack]

i can use ep3 spec end links?

[Mighty_Mouse_Ep]

i can use ep3 spec end links?

Yes they should work fine

[epchad]

this is a great thread it really helped alot

[poeticfinesse21]

Just posted this in another thread...

The 15.9mm EM2 front sway is P/N 51300-S5D-A02. I have one sitting in my living room

You need the 15.9mm bushings to go with the 15.9mm bar.

I've been looking for that part # everywhere. Good shit

[Eddie Murphy]

I have a k24a2 swap, would the 16mm em2 sway bar clear the header? what would be the best sway bar to have that will clear this setup.

I just swapped a k24a2 and am running OBX V2 race headers. I had to remove front sway and I want to know if the em2 16mm sway will fit? Thanks...

[fugazzyek]

I just swapped a k24a2 and am running OBX V2 race headers. I had to remove front sway and I want to know if the em2 16mm sway will fit? Thanks...

almost the same swap, +1 to know about it

[cyllarus]

100% Confirmed, it will fit.

I have a k24a2, DCRH, and the 16 MM em2 sway. it clears just fine but is close on the passenger side when the car is up on jacks.

As the car is lowered the bar rotates back and gains more clearance.

[Eddie Murphy]

^^^ I tried and it's too close for me to actually say it fits.
A credit card of clearance is all it afforded. Any bumps and I suspect it will bang around.
Others(CRSX guys) have reported the same, that it bangs around when driving.