Small/Quick/Common/Dumb Question Thread (use this instead of making new threads)

[nmysiismyn]

I saw a REVO brand short shifter labeled "for 01-05 RSX/CIVIC" a while back

Is there any truth to this or no?
The picture showed a short shifter assembly, not an adapter.

Sounds like a typical Ebay description...

[nmysiismyn]

I saw a REVO brand short shifter labeled "for 01-05 RSX/CIVIC" a while back

Is there any truth to this or no?
The picture showed a short shifter assembly, not an adapter.

You might be referring to THIS ad on ClubEP3..
It doesn't have the Si listed..

[PatrickJamesYu]

You might be referring to THIS ad on ClubEP3..
It doesn't have the Si listed..

Not that ad specifically
I saw it on robear

but cool, this clears things up.

thanks

[chrismacmx]

i am wondering is 02-03 oem mudguards will fit in my 04 ?

[nmysiismyn]

i am wondering is 02-03 oem mudguards will fit in my 04 ?

No sir-e-Bob.
The rears will, but the fronts won't.

[SkareKrow]

i am wondering is 02-03 oem mudguards will fit in my 04 ?

Modify them. Slice the flat side that goes towards the back that the side skirts are resting on. Then that one slice drop/fold it towards the front becomes part of the flap. Use some E-6000 Glue the folded part onto the front and thats about it. Then buy some type of hard plastic and cut it out and usen that E-6000 to glue it onto it. B-).


Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!

[JJay.]

Where could i order the half nose bra with the fender sides cut off?

[MBaG]

Where could i order the half nose bra with the fender sides cut off?

h and a accessories.

[EPWRC]

Hey everybody,

I have an 02 SI with an a2 swap and I am having a bit of a problem. The throttle is extremely touchy at anything under 3k rpm...it seems like the engine rocks pretty hard although the engine mounts (with esmm) seem to be in good shape. After 3k I get get on/off throttle quickly and everything seems smooth. I do have an unsprung clutch but don't know if that would cause the problem only at low rpm. I also have K-Pro although I have no idea how to use it (came with the car when I bought it).

Thanks for any input

[StimulisRK]

Is there any 'right' way to take the center console paneling off? I'm gonna wrap it or paint it.

[mitchlikesbikes]

Is there any 'right' way to take the center console paneling off? I'm gonna wrap it or paint it.

take your shift knob off first, then just be CAREFUL and use a small smooth screw driver, take the bottom one off first, then unplug your hazard button, then do the top one and take everything off of it for paint. just make sure to remember to plug your hazard switch back in or your turn signals won't work next time you go to drive haha. it's really just about patience and taking it slow

[SkareKrow]

take your shift knob off first, then just be CAREFUL and use a small smooth screw driver, take the bottom one off first, then unplug your hazard button, then do the top one and take everything off of it for paint. just make sure to remember to plug your hazard switch back in or your turn signals won't work next time you go to drive haha. it's really just about patience and taking it slow

Don't use the screw driver. Push the boot inwards with your hands and pop it out. Then the rest is simple

Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!

[mitchlikesbikes]

Don't use the screw driver. Push the boot inwards with your hands and pop it out. Then the rest is simple

Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!

i actually had to use a screwdriver the first time because for whatever reason the thing was stuck on there and i couldn't get it off behind the boot. this method is a lot better if you can do it that way though, no threat of dickin up your trim pieces.

[SkareKrow]

i actually had to use a screwdriver the first time because for whatever reason the thing was stuck on there and i couldn't get it off behind the boot. this method is a lot better if you can do it that way though, no threat of dickin up your trim pieces.

The dumb ass that had the car before me cracked the dash right there where that bottom part pulls up. I hate when I see it. Lol

Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!

[nmysiismyn]

Modify them. Slice the flat side that goes towards the back that the side skirts are resting on. Then that one slice drop/fold it towards the front becomes part of the flap. Use some E-6000 Glue the folded part onto the front and thats about it. Then buy some type of hard plastic and cut it out and usen that E-6000 to glue it onto it. B-).


Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!

You're not joking, are you?

Where could i order the half nose bra with the fender sides cut off?

Yeah..
I'm not 100% sure because H-A doesn't use flat-rate shipping, but I think Majestic Honda's a bit cheaper, at $61.19.

Is there any 'right' way to take the center console paneling off? I'm gonna wrap it or paint it.

If you just go at it, you'll see that it's easy...