Close

Results 1 to 7 of 7

Thread: Cheaper JRSC-R

  1. #1
    Registered User
    Join Date
    Apr 2008
    Location
    Schofield Barracks, Hawaii
    Posts
    42

    Cheaper JRSC-R

    Alright guys already have k-pro and going to be ordering my jrsc-r soon. Was looking at the prices and saw that you can get the kit without injectors and the map relocation for 600 bucks less. If you buy the map relocation by itself it's $130....soooo.

    My question is, can I get some 440cc injectors with clips for less than 500 bucks and save a bit of cash? Don't really know much when it comes to injectors. Can I get some used injectors that are bigger than 440cc and just tell kpro their size and it will compensate?

    I will be getting it tuned, just want to know if I have to stick with 440cc, or if I find some used ones that are bigger if that would be fine also.

    Also, any brands I should be looking at? Best and/or cheapest?

    Am I missing something?

    If you buy injectors by themselves from JR they charge you an amazing $854, and looking at prices of injectors online they're like 200 bucks for all 4...not sure if I have this all down though.

    Thanks for the help!

  2. #2
    Registered User 03Si757's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Virginia, United States
    Posts
    1,103
    You can also try looking at used blowers to save some coin, most used units will come with injectors and what not. Most people go out right with 650's for future modding of the jrsc. The question on the injectors would come down to what gains you wish to aim for. Another words, whats your goals? If you just want what the Race kit gives, stick with 440's. If you wish to push higher, look at 650's. You got RC, Injector Dynamics, Precision's, and Hondata sponsored http://www.deatschwerks.com/civic-k20/k24

    Over on ClubRSX.com You can pick up 4x 650 Precision injectors for $70 a peice.... so $280 shipped, cant go wrong there.
    Last edited by 03Si757; 02-20-2011 at 09:18 PM.

  3. #3
    Registered User
    Join Date
    Apr 2008
    Location
    Schofield Barracks, Hawaii
    Posts
    42
    I'm going to put the jrsc on with a 3.8 pulley and 2.5 idler, I have s2 stage 1 cams atm, and i/h/e of course, will probably step up to meth injection at some point. Was thinking about doing a vtec killer setup also, not sure. So yeah, I guess I'll go with 650s. Now my other question would be, What kind of clips do I need, does it matter? Total noob when it comes to injectors, haven't really thought about them until now, was just going to use the whole jrsc kit. Thanks for the help

  4. #4
    Registered User 03Si757's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Virginia, United States
    Posts
    1,103
    I believe you can either get pig tails which will need to be wired into the factory harness, or most aftermarket companies offer plug and play wires aswell.

    Check these...

    Injectors http://www.clubrsx.com/cr/PTE-041-0651.html

    Clips (curretly out of stock) http://www.clubrsx.com/cr/PTE-044-1005.html

  5. #5
    Registered User
    Join Date
    Apr 2008
    Location
    Schofield Barracks, Hawaii
    Posts
    42
    Awesome man, appreciate it. Thanks for the help.

  6. #6
    Registered User 03Si757's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Virginia, United States
    Posts
    1,103
    Quote Originally Posted by XytL View Post
    Awesome man, appreciate it. Thanks for the help.
    BTW, get my PM?

  7. #7
    Registered User
    Join Date
    Apr 2008
    Location
    Schofield Barracks, Hawaii
    Posts
    42
    well now that you said something, yes, yes I did =P

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •