you have any specs on the S/C SVM cams? I saw on their website that they were under construction- are you testing them out or are they in production?
you have any specs on the S/C SVM cams? I saw on their website that they were under construction- are you testing them out or are they in production?
No I don't know the cam profile info on the S/C version of the Stage 212 cam. I do hope to be the first person to test it though. I have seen the results from his N/A cams and they blow the doors of all other after cams. Nikos has done his R&D and understands how these motors breathe. Plus they actually design and manufacture their cams in house unlike most other companies who out source which mean a lot of them are using the same cores.
Most of all though what company is confident enough in their cams that they will take the cams back within 30 days of them being received after they have been installed! Like Nikos said "If we cannot guarantee satisfaction which really means unparalleled performance, there is no need for more hacks. There are plenty out there."
Considering the dynos being posted (many different setups - all n/a so far) and the results that have been achieved SVM is shaping up to be THE one stop shop if your serious about getting the most from what ever setup your running.
I do believe they are production.
I have been following the build up of SVM on K20a for a while now- id be really interested to see what the S/C spec'd cams can do in my JRSC k24 with meth.
What other supporting mods do you have? You PM me the list if you'd prefer to vs posting it. I'll send you mine in return - I don;t have ~15K worth of parts for no reason, hahaha. When all is done it'll be closer to 18-19K in parts alone... funny thing is I still have a stock bottom end and head (for now but only the cams will be swapped).
Would these SVM cams work with a BC valve train and ferrea rockers? I'd be curious if they work since I havent gone ahead yet and purchased any cams yet.
no worries- i can give a general run down. you have me beat- i am probably closer to 7k in the hole.
04 k24a2 swap- 38miles total when purchased
-50deg VTC
-type s oil pump
EP JRSC- 3in pulley
AIS 3 gal meth inject kit- single 14 gph nozzle
AEM type- S 3in CAI
PLM/ kiddracing RH
custom 2.5in exhaust- kteller piping/ vibrant stealth muffler
ID 725cc injectors/ Deatchewerks 265lph fuel pump
made 326whp/ 243ftlb @9psi two weeks ago during the heat wave. 90+ deg heat and 70+% humidity were killer.
Make a post in this thread: http://www.k20a.org/forum/showthread.php?t=100868
Def get the RSX JRSC Manifold, Mercracing.nets High Flow Inlet, HR 74mm TB, 4 inch CAI, and a full 3 inch exhaust. Your missing out on so much power!!
Nice number though and I bet the car is a blast. I am glad that I'll never have to deal with heat soaking the blower again :)
i went with the EP JRSC for ease of install- i didnt want to hack my rad support to all hell at the time. if i were to look at the RSX manifold- it would only be for a M90px blower upgrade with an aftercooler. in all honesty- the power is almost perfect for what i want it for (autox, road racing, mountain twisties)... if my ambitions start to grow- im probably just going to get a CTD fab turbo setup
You don't have to do any hacking :) Trust me, haha.
I will either go with the M90 or the TS once I crush the M62 record. Though before upgrading the S/C I'll be building a fully forged high comp K24 and upgrading my A2 head to beat what ever numbers my car laid down with stock bottom end :)
Here are some teaser pics gents!!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks