Yes it will fit. HOWEVER, because of the crap bolts supplied by Moss they are prone to break with the Hondata heatshield installed as well. The problem is that there is less thread in the head with the heatshield installed. Thus, the bolts break off at the bolt head. Leaving a bunch of choice words in your mouth.
So my advice is to find some longer bolts that will fit. Now by longer I'm talking about like 1/8 to 3/16 longer. If they are too long they won't go in because of the horrible manifold design. The studs as I recall you can't do much about again, cause of the horrible manifold design.
Don't even think about over torqeing just to get extra threads. Your gonna break something major by doing that. Those bolts only torque to 16ft lbs. It's a aluminum head.
I've done all of this after spinning at the track in the rain at 100ish. I hit a burm and the impact broke 3 of the 4 short bolts off at the bolt head. That produced a loud squeal from my jrsc. I though I sucked up water.
Post up if you need install help, or pm me.
Christian
Bookmarks