J's Racing wide fenders

[Canuck Civic]

Anybody run these I'm interested in them although not fond of the vent.

http://www.nengun.com/js-racing/front-wide-fenders

[PAPITUYO326]

Hadn't seen these. Pretty neat.

[civictype_r04]

I would get them if they made replicas!!!!


Sent from my iPod touch using Tapatalk

[MadLorEP3]

tempting

[Babylegg03si]

The rears you can just roll and pull or even cut or trim it. I'm needing to replace a fender anyway so I might just save up for these if they're still available.

[02TWSI]

Sick

[lbk02si]

you could always glass those vents over, they do look pretty ricey! but i'd be curious to know how much of a wider tire you could run with these.

[VividSI]

I want these. maybe i can get the shop to make side marker holes exactly where the oem ones would be.

[88crx]

Yes I have these fenders.... not installed yet, but hopefully in the next couple week the car goes into the body shop.

I'll snap some more detailed pictures tonight, but they are designed to retain the use of the stock fender liners. I'm not sure how much space you gain if you use the liners though, since the lip of the J's fender is wider than stock it doesn't create much clearance. You could make tons of room if you trim the J's fender and ran no liner.

Bumper and side skirt attachment all stay stock, just flares at the top.

[Canuck Civic]

Thank you so excited to see some better pics of these fenders.

[Babylegg03si]

Ohhh, ok. I just saw a few pictures of Kazuo-san's EP3R with the fenders and it looks clean. I really like it.

[ep3jd]

Tooooo bad we have room in the front, just not the rear lol

[abstract]

Tooooo bad we have room in the front, just not the rear lol

x2 and can u use the oem fender liner with these?

[talonXracer]

Tooooo bad we have room in the front, just not the rear lol

Huh?

There is plenty of room in the rear of the EP3 for suspension movement with up to a 235 with the correct backspacing and even larger with just a ever so slight trim of the rear wheel well arch.

I would think that the stock fender liner would need to be replaced as well, especially seeing it is the cause of most wheel/tire fitment issues.


I have yet to see a aftermarket front fender that addresses the proper fit and retention of the front bumper cover.

[MugenReplica]

I'm positive 88crx bought a set before all the J's Racing murder hoopla and has been shipped the wrong fenders once or twice. I'm sure as soon as he notices this thread, he'll pop in and share his outlook on hte fenders.