nice, finally a DIY
so all you needed to purchase from honda is those 2 connectors and bulbs? the original bulbs dont fit?
what connectors are you talking about?
I did this about a week ago and i haven't seen a diy, so i thought I'd make one.
This is my first diy, so go easy on me
you will need:
8 wire taps
electrical tape
a really small screwdriver
2 sockets p# 33304-S30-003
2 bulbs p# 33303-S30-003
2 connectors p#04321-SH2-307
8 pigtails p# 04320-SP0-A00 or p#04320-SP0-B00
(I had a couple extra connectors and terminals, but you can go to the dealer and have them match it up)
the brake/turn socket will transfer over with no problem. you will need to remove the connector from the top marker light and tap it to the reverse wire
Remove the terminals from the top marker light
you will need a really small screwdriver to lift the lock in the connector and remove the terminal
add terminals to the connector you removed
and to the connector for the new socket
Tap the new connector wires into the top marker light wires (it doesn't matter which way you tap the wires)
Tap the the connector you reused into the reverse light wires (it doesn't matter which way you tap the wires)
Everything should look like this
Electrical tape all the wires separately so they wont short out
and then install into your new (or should i say old) tail lights
Do the other side and you're done
hope this helps out all the people that want to do this. if i left out anything out please tell me.
Last edited by jwdep3; 03-31-2011 at 04:00 PM.
nice, finally a DIY
so all you needed to purchase from honda is those 2 connectors and bulbs? the original bulbs dont fit?
what connectors are you talking about?
the reverse light socket and connector on the 04-05 tails will not fit anywhere on the 02-03 tails.
the top marker light socket will now be your reverse light socket and the new socket will be the top marker light socket. the brake/turn signal light will swap right over.
I had extra connectors and terminals laying around, but if you bring the new socket to the dealer they'll match up new connectors for the new sockets.
you can also ask for the terminals
they cant match up the connectors if they dont have them in stock, dealer never has parts for our cars in stock so im not gonna even bother with that lol. Can you look on majestic honda and give a part number for the sockets?
thanks
these are all the part numbers you need to do this
2 sockets p# 33304-S30-003
2 bulbs p# 33303-S30-003
2 connectors p#04321-SH2-307
8 pigtails p# 04320-SP0-A00 or p#04320-SP0-B00
let me know if you have any other questions
awesome DIY!
thanks!
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
Yeah, one pack will be enough.It only comes in packs of 10
i got them from a Honda dealer. $86 each.
yea majestic wants $83 for each, ill give a call to my local dealer and see how much they want but im sure its gonna be a lot more
nice DIY, helped me out so much since now i know exactly what to do and get
Last edited by 03Si757; 01-11-2009 at 07:56 PM.
one more quick question, how come when i look up this part number for the connector it says 5 pieces?
http://www.hondaautomotiveparts.com/...VIN+Number+---
I'm wondering the same thing, but I think you'll get 5 pieces.
I can let you know next week.
Another thing you have to do for this is swap over the bumper holder bracket thingie on the bottom of your 2nd gen lights to your 1st gen lights. Its two philips head screws.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks