DIY : 04-05 to 02-03 tails

[jwdep3]

I did this about a week ago and i haven't seen a diy, so i thought I'd make one.
This is my first diy, so go easy on me

you will need:
8 wire taps
electrical tape
a really small screwdriver
2 sockets p# 33304-S30-003
2 bulbs p# 33303-S30-003
2 connectors p#04321-SH2-307
8 pigtails p# 04320-SP0-A00 or p#04320-SP0-B00
(I had a couple extra connectors and terminals, but you can go to the dealer and have them match it up)



the brake/turn socket will transfer over with no problem. you will need to remove the connector from the top marker light and tap it to the reverse wire



Remove the terminals from the top marker light



you will need a really small screwdriver to lift the lock in the connector and remove the terminal



add terminals to the connector you removed



and to the connector for the new socket



Tap the new connector wires into the top marker light wires (it doesn't matter which way you tap the wires)



Tap the the connector you reused into the reverse light wires (it doesn't matter which way you tap the wires)



Everything should look like this



Electrical tape all the wires separately so they wont short out



and then install into your new (or should i say old) tail lights



Do the other side and you're done



hope this helps out all the people that want to do this. if i left out anything out please tell me.

[RHCP0801]

nice, finally a DIY

so all you needed to purchase from honda is those 2 connectors and bulbs? the original bulbs dont fit?

what connectors are you talking about?

[jwdep3]

the reverse light socket and connector on the 04-05 tails will not fit anywhere on the 02-03 tails.
the top marker light socket will now be your reverse light socket and the new socket will be the top marker light socket. the brake/turn signal light will swap right over.
I had extra connectors and terminals laying around, but if you bring the new socket to the dealer they'll match up new connectors for the new sockets.
you can also ask for the terminals

[RHCP0801]

they cant match up the connectors if they dont have them in stock, dealer never has parts for our cars in stock so im not gonna even bother with that lol. Can you look on majestic honda and give a part number for the sockets?

thanks

[jwdep3]

these are all the part numbers you need to do this

2 sockets p# 33304-S30-003
2 bulbs p# 33303-S30-003
2 connectors p#04321-SH2-307
8 pigtails p# 04320-SP0-A00 or p#04320-SP0-B00

let me know if you have any other questions

[Tnhatch03]

awesome DIY!

thanks!

[RHCP0801]

these are all the part numbers you need to do this

2 sockets p# 33304-S30-003
2 bulbs p# 33303-S30-003
2 connectors p#04321-SH2-307
8 pigtails p# 04320-SP0-A00 or p#04320-SP0-B00

let me know if you have any other questions

for the last part you said you need 8 of them but the part number says 10 pieces so thats enough right

[jwdep3]

Yeah, one pack will be enough.It only comes in packs of 10

[RHCP0801]

where did you get the tails from?

[jwdep3]

i got them from a Honda dealer. $86 each.

[RHCP0801]

yea majestic wants $83 for each, ill give a call to my local dealer and see how much they want but im sure its gonna be a lot more

nice DIY, helped me out so much since now i know exactly what to do and get

[jwdep3]

make sure you buy the gaskets too

[RHCP0801]

yea i will

[RHCP0801]

one more quick question, how come when i look up this part number for the connector it says 5 pieces?

http://www.hondaautomotiveparts.com/...VIN+Number+---

[Twisted-X]

I'm wondering the same thing, but I think you'll get 5 pieces.
I can let you know next week.

Another thing you have to do for this is swap over the bumper holder bracket thingie on the bottom of your 2nd gen lights to your 1st gen lights. Its two philips head screws.