Nice! Very Nice Happy VDay to you & your ep!
":;,,,;:" $|{@|2€|{|?()\\//\\// using HTC Evo 4G!
Happy Valentines day me!
parcel arrived today from the U,S of A. lol
Very Suprised by how light it was
Intake was 340g and Filter was 447g. the whole intake weighs only 777 grams!
and Fitted!
Picture also shows my new strut brace and Bonnet Riser.
also got a Billet rear wiper delete.
Last edited by Pip; 02-14-2012 at 04:44 PM.
Nice! Very Nice Happy VDay to you & your ep!
":;,,,;:" $|{@|2€|{|?()\\//\\// using HTC Evo 4G!
Picked this up today.
Jackson Racing Supercharger
8psi Pulley
RC Racing 650cc Injectors.
Hoping to see 300bhp with the manifold, 2.5 inch BuddyClub Exhaust System and Intake.
:thumbup:Nice stuff picked up!
~§kareKrow
»»{":;,,,;:"}«« using HTC Evo 4G!
I want to see the engine bay with the Password Intake and the JRSC on it. Debating if I want that intake or not.
fitted my mount inserts today.
Energy Suspension mounts for the Engine and Powerflex for the gearbox mounts.
Some parts form Honda Arrived too. one is a bolt for my cam cover. as one won't come out.
probably going to sheer or cut the bolt. so bought a new one.
also got some small bulbs for the hazard light and rear heated window switches as mine have gone out.
Painted some more parts too.
My slam panel and crash bar.
and fuel rail ready for the JRSC
The Gearbox mount.
Mount Fitting.
Before,
After
Fitted.
Removed the A/C System. :WOOT
and this little bracket.
started fitting the charger also.
Removed all the intake.
Thats it for today will finish fitting the JRSC tomorrow once i have trimmed down the OEM belt tensioner.
Very nice! Sounds like its going to be fun!
Sent from my PC36100 using Xparent Red Tapatalk
wow didnt know they made a insert for the tranny mount
Must.. have that rear wiper delete. Link me!
Yeah Powerflex make them over here. not sure which company make then in the US
http://passwordjdm.com/
Couple of small mod's needed to be done before fitted the Jackson Racing Charger.
This is the OEM Belt tensioner.
and this is it with the modification done needed to use the OEM auto tensioner with the JRSC kit.
It also needed Shaving a small amount for metal from near the Intake. for clearance for the charger.
Both pictured here.
The JRSC fitted:
and two short video's
one of my idle withe the BuddyClub Spec4
and one of the bay with the JRSC fitted and running once warm.
Last edited by Lucid Moments; 03-16-2009 at 06:34 AM.
Nice!
Sent from my PC36100 using Xparent Red Tapatalk
What size of belt did you use & do You still have ac
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks