Spc can be found for $69.99 on jegs.com
Don't buy ebay
I'm riding on Skunk 2 lowering springs and stock shocks and my camber is off a lot in the back. I'm trying not to put out $150 for an Ingalls or SPC but too scared to get the $60 ebay kits. Does any body have any input on these they look like ingalls?
http://cgi.ebay.com/ebaymotors/02-06...item25642af85f
thx
Spc can be found for $69.99 on jegs.com
Don't buy ebay
Ahhhhh, I never noticed that. But jegs is still a tuner site, they can be sourced for less still
Might do ingalls from corsport for $138.
How much is the shipping for that? I think clubrsx sells spc for 155 free shipping. I'm trying to find more places to buy them cheap.
Check these two out:
http://www.corsportusa.com/store/cat...ducts_id=11555
http://www.streetrays.com/store/inde...oduct_id=33265
I'm not sure if both came in pairs but the megan said it is.
Last edited by jed_averill; 06-14-2011 at 04:53 PM.
Everything ships for free from corsport!
Ingalls $138
http://www.corsportusa.com/store/cat...roducts_id=274
So far megan is the cheapest ive seen of the name brand kits but it doesnt say what the adjustment range is. Maybe if we pm corsport they can give us an ephatch discount.
And also ask them what the adjustment range is.
corsport is cheap, i found some used sbc camber kit for 60$ but i think i was lucky
I think even ebay camber kits will hold and will do what you want them to do
Adjust your camber.
BUT the bushings on those cheapie ones are absolute crap.
There's pictures floating around somewhere on here, but after just a few months the bushings will be completely torn apart
So I say its a good thing to be scared of those ebay camber kits.
I say go Ingalls, or SPC.
And then I don't think you can go wrong with brands like Skunk2, Buddy Club etc.
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
I have seen several of the cheap ebay kits that have broken and have even seen one fold up. SPC camber arms are highly conducive to corrosion because they are simply oxide coated. give them a quick coat of paint before install. Oxide coatings do not last long unless slathered in protective oil or grease.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Do NOT buy ebay camber kits!!!!
I will say it a third time, EBAY camber kits are GARBAGE
Does anyone know if I can get the front camber kit bolts at a brick and motor like autozone or an import part place?
I'm getting my shocks & struts replaced and I also have a clicking noise coming from the front passenger side. It doesnt get worse when i turn so the shop thinks its the ball joint. also the nut on the back of the passenger ball joint wont tighten.
Anyway I wanted to get it all done at the same time but the ball joints are already here and I havent ordered a camber kit. Thinking I could just do the front so my steering wheel is straight again and get the rear done later.
It's been five years droped on stock shocks whats another six months lol!
What did you ask corsport? I emailed them and they emailed me back right away. I asked if they came in pair, and they said yes.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks