keep twisting and pushing....... other then that... patients!....
i need some tips/ instructions/ on getting this back in
keep twisting and pushing....... other then that... patients!....
it's a sticky in the suspension subforum:
http://www.ephatch.com/forum/showthr...ped-out-help!!
it take patience. most of the time it only takes a few min to work it in. one time it took me over an hour. its fustrating but it should go in eventually
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
Take it out completely and drop it on its inbound side on a piece of wood gently and it will go back in.
You should probably only do it as a last resort, because someone told me you could damage it. Nothing happened to mine though
hold it from the bottom and push upward, while wiggling it from clockwise/counterclockwise. you will feel it with your hands when it wants to go in. push hard though and if you want some leverage use a jack to hold it while you move it
Wrap your hand around the tripod "knobs" and squeeze them(they are spring loaded) and then push wiggle the tripod back into the drive cup.
Sometimes it wil pop right back in easy as pie, other times 4lbs of C-4 wont help untill it just drops right in............
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
thanx guys the easiest way was puttin on the tire, turn-push-wiggle all together took me no longer than 10 mins.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks