Yes it will fit. You will need to roll the rear fender. You need a front and rear camber kit. Your gonna run -2 up front and -3 to -5 in the rear depending on your tires... That's about it bro
Hey guyz im really interested in purchasing sum wheelz for the ep3 i like the xxr 002 but i was wondering wut would i have to do once teying to install them theyre 5 x 114 16x8 [+0 mm] offset so do i need to stretch my tires or replace the hub work with my cambers? Fender rolling? Or anything??!! Lemme kno id appre iate any help
Yes it will fit. You will need to roll the rear fender. You need a front and rear camber kit. Your gonna run -2 up front and -3 to -5 in the rear depending on your tires... That's about it bro
You can actually run them how ever the hell you want.
Beefy tires, stock height, blah blah blah.
It just depends on what kind of 'stance' or look you want to execute.
Your average ep3 owner with these wheels run stretched tires, low, and lots of negative camber.
I'd run 195/50/16 tires.
It's a nice stretch, and it's not under-sizing your tire diameter a whole lot
I'd get hub centric rings if because the offset's are so low, and you probably will run camber. You need 73 to 56.1.
I HIGHLY recommend rolling your fenders if you plan on getting ANY aftermarket rims. I think it makes things much easier in the future.
Camber wise I ran about -3 front and about -6 rear.
And like any aftermarket wheel you need lug nuts designed for it.
You CAN NOT use oem lug nuts.
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
Hey guys thanks i really appreciate it! Im really going for that agressive look its really hard since the wheel well is so wide but heres a link of how id like it to look sort of http://carphotos.cardomain.com/ride_...4035_large.jpg
Better yet more like this itz so nastyy http://honda-tech.com/attachment.php...1&d=1287124633
Okay so you posted up Andy's ride and Miah's ride.
No Hate on Andy (just hung with him yesterday actually) but his ride is just a tiny bit too tall, and not enough camber for the wheels
He needs to drop it a bit more.
Miah on the other hand is pretty fricken slammed.
He's got more camber front and rear, and more stretched tire, which allows him to go lower and execute that look better.
Miah's tire size: 195/50/16
I forgot the alignment but it's around -4F and -6R
Andy's tire size: 205/45/16
I forgot the alignment but it looked like 0 front and -3 rear.
Also: Andy hasn't rolled his fenders, but Miah did
Also I think Miah did a .25" fender pull but I may have that mistaken with someone else.
Last edited by PatrickJamesYu; 08-09-2011 at 01:19 PM.
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
I have 205/45/16 and its not that bad... tho i do have my fenders rolled i was able to slam my ride with yet the agressive and hellaflush look...-2 upfront and -4.5 in the rear... i did try 195/40 and it was tiny and streched... id opt out for miahs specs...
195/50/16 fucking sick and flush with good amount of stretch
205/40/16 clean but have to be slammed to be hella flush
205/45/16 ok if u dont want to be slammed while being flush
Those three are the tires id go with...
hey hey I thot I felt someone talkin bout me!! lol
yea I dnt have a camber up front nor fenders rolled up front. back is about -3 give or take. and rears r rolled btw. I have a finger space all around. I haven't adjusted anything for awhile so sorry if it ain't right..lol
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
btw Miah had 195-45-16 with 0 offset up front and -6 in rear.
major jones is the one running with 195-50-16 -2.7 in front and -5 rear...
and gamma6 -2F and -4.5 in rear.
did my hmwrk as u can see...lol
no worries tho pat ain't trippn
Last edited by JaydmEp3; 08-12-2011 at 01:41 AM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks