Reply With Quotewhat do you mean by bore over?
the tie rod end for the dc5 will work if you have the dc5 suspension
So what part is it that we have to bore over on our suspension to install dc5 tie ends? (inverted ones)
what do you mean by bore over?
the tie rod end for the dc5 will work if you have the dc5 suspension
Originally Posted by nmysiismyn
Ecclesiastes 1:9
"What has been will be again,
what has been done will be done again;
there is nothing new under the sun."
-King Solomon
theres a way to use the DC5 ones as well on EP suspension
Is this a statement or a question?
In either case I am not sure...I know that I have a DC5 specific suspension with a dc5 tie rod end
Ecclesiastes 1:9
"What has been will be again,
what has been done will be done again;
there is nothing new under the sun."
-King Solomon
To use the DC5 tierod ends in a EP3 require you to enlarge the taper on the steering arm, the proper size taper bit is about 25$ or so for a quality one.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
oh lol...I get it...sorry op...i'm kinda slow
Ecclesiastes 1:9
"What has been will be again,
what has been done will be done again;
there is nothing new under the sun."
-King Solomon
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks