All k series clutches the same or different??

[hondakiller]

All k series clutches the same or different??

[02TWSI]

Different when it comes to your combination of clutch and flywheel...a2 clutch a2 fly....a3 clutch a3 fly.

[hondakiller]

I was looking on eBay at a stage 3 xtd pressure plate and flywheel. It said would fit a k20a3 or a k20a2 and k20z1 and one other. So would that work on my stock flywheel??

[Blah1219]

Nope. Make live easy for you and just buy a k20a2 flywheel of here or k20a.org and buy a exedy clutch for a rsx-s (k20a2/z1). There's just some things I wouldn't buy from ebay.. Actaully there's alot of things I wouldn't buy. You are going to save headaches and mistakes.

The k20a3 and k20a2 flywheels have DIFFERENT bolt patterns, so you can't do any vise versa or they won't bolt up.

[hondakiller]

So if I get a k20a2 type s clutch pressure plate and fly it would work with my 5 speed tranny and the fly will bolt up to my motor???

[Blah1219]

Yes sir. They bolt up right up to the block and tranny with no modification. You just need a k20a2/z1 flywheel to mate to a k20a2/z1 clutch or k20a3 flywheel to mate to a k20a3 clutch. The k20a2 flywheel is actaully a pound less than the a3 flywheel.

[hondakiller]

Thanks guys I ordered a stage 3 racing clutch with a 10 pound fly wheel for a a2!!

[Blah1219]

Thanks guys I ordered a stage 3 racing clutch with a 10 pound fly wheel for a a2!!

By any chance, do you have a turbo or at least an engine swap?

[hondakiller]

Nop, Why?

[EDU]

By any chance, do you have a turbo or at least an engine swap?

Nop, Why?

hes problaby wondering why in the hell did u ordered an stage 3 Racing clutch without any power to back it up.....

[hondakiller]

I was looking for the cheapest way to give me another month or 2, stock clutch and pressure plate was 380, the one I just bought was 375 plus shipping. I rather do that than stock any day

[hondakiller]

It's being stored in a Month or 2 for winter and than having a Tsx k24 put in it so. I just need it for 2 more months

[Blah1219]

hes problaby wondering why in the hell did u ordered an stage 3 Racing clutch without any power to back it up.....

Thank you sir!

I think a stage 2 exedy stage would have done the job for the k24a2 with strong bolt ons.