sorry buddy but you dont need to go buy something you dont need to waste money on. the fron emblem removes with 2 phillips screws.
For anyone who is going to install CTR H badges,
I suggest getting a couple of the special rivets for the front
H from your dealer. That way you can just remove the whole stock
riser plate with emblem intact, and reinstall it at any time.
(I posted this info in the custom parts listing(**edit**appears parts listing forums have been deleted**edit**) , but I figured I'd post it here as well so more people would see it.)
Part#: 90301-ST0-003
disc.: Push Nut 3mm
Last edited by SiRman; 01-03-2003 at 11:39 PM.
sorry buddy but you dont need to go buy something you dont need to waste money on. the fron emblem removes with 2 phillips screws.
Yeah, the CTR emblem goes UNDER the black riser where our current "H" is.
Steve
Hey guys, I think that's what SiRman sayin'. He's talking about those little circular clips that slip on to the CTR emblem posts. Instead of buying new, I just carefiully removed my old clips, reshaped them, and then reused them for mine.
I know... I'm kinda cheap and lazy but it worked for me.
i also removed the small clips, take your time when removing them.
Yeah exactly, only instead of the risk of breaking either the tabsHey guys, I think that's what SiRman sayin'. He's talking about those little circular clips that slip on to the CTR emblem posts. Instead of buying new, I just carefiully removed my old clips, reshaped them, and then reused them for mine.
on the stock H or the rivets themselves. I was only suggesting
the use of new rivets and providing the part number for those interested.
I wasted no pennies on them, as I got them free when my dealer installed the emblems for me.
sirman, wut the heck are you talking about?? u're not supposed to remove the silver H. u're supposed to move the whole backing. its connected with two screws. keep the silver H on that black junk.
You guys are f***ked. Try reading my original post before responding. If you need any further clarification then let me know.
i still dont understand your post.. if we wanted to put it back, can't we just screw it back? why do we need rivets and junk?
Step 1: Remove platform with stock H emblem attached.
(i.e. remove 2 phillips screws from back of grill)
Step 2: Mount CTR H directly to grill.
Step 3: Here is where the choose your own adventure begins.
You can: A) Use two new rivets to secure the emblem.
Avoiding removing the ones from the stock
one.
B) Remove the rivets from the stock H.
You may get away with removing these to
mount the CTR H. But if you want to switch
back to the stock H platform ( or your CTR H
gets stollen). Your stock riser and H are now
seperated requiring rivets again anyways.
Is this clearer?
Or ...
D) Attach without rivets and be done.
:)
STeve
uhhh not really.. why do you need rivets.. the red H comes with 2 pointy things that fit directly into the two holes. match the pointy things up with the holes, and its on, i think ssvr6's way is better. and its the way "normal" people do it. Sir man, ure strange
Anyways the original purpose of this post was to provide information to people. Rather then determine wether I was "strange" or "normal".
I'm done with this BS.
where is the 2 screws on the back of the riser? because i cant reach it ? how did u take it off ???
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks