JRSC CNC billet high flow custom inlet

[eP3RoyaLTy]

Has anyone been watching this thread over on clubrsx??
He's taken preorders on these new inlets and taking 75$ off if ordered by the end of the month...(I have no affiliation w/clubrsx or the guy making the inlets this is just a heads up since I thought it was a good deal n product)

http://forums.clubrsx.com/showthread.php?t=808978

Quote from Jmercado567 on clubrsx:
"After years hoping to be able to help on the subject and tried manually building the units, I have finally been able to work with two awesome CAD designers and provide the first custom CNC inlet for the JRSC.

The designs were made possible by Andy for the JRSC design concepts and Jesee for the Civic Si design concepts. They both worked really hard with me to build something that will be worthwhile in the long term, flow great, and provide some visual appeal.

As such we made the unit modular to accommodate various TB options and avoid spacers.

A fully functional prototype is in order for the Civic Si and if all goes well it will be ready in about two weeks. If anyone wants to join on the RSX side for a prototype at a partial cost, just shoot me an email.

The design is a bit more critical than the CT unit because of the bypass and the idle control valve unit.

There are still some changes that may be needed for the RSX unit due to hood vs throttle cable clearance verification, etc and ensuring the clearance of the bypass valve and idle valve wiring clip.

I will be taking pre-orders at my site under supercharger upgrades. http://mercracing.net"

[Euro-Yellow-Ep3]

What a great idea, if only i had a SC

[Ba82Ep3]

Meh... needs some refinement it looks like...

[eP3RoyaLTy]

lol yeah def got a sc first...

ba83ep3.... check out the new piks the production units look to be a bit "refined"

[Ba82Ep3]

Will do. Admittedly the inlet being straightened out/opened up would help tremendously if all other avenues were taken to maximize its purpose... possibly even reduce air temp somewhat before it gets to the charger. But thats gotta look a whole lot better before i would even consider it... lol

[neoamd]

Will do. Admittedly the inlet being straightened out/opened up would help tremendously if all other avenues were taken to maximize its purpose... possibly even reduce air temp somewhat before it gets to the charger. But thats gotta look a whole lot better before i would even consider it... lol

I'll know how well it performs once its finished.

I'll be using the RSX version w/ a HR 74mm TB. I'm hoping I'll cause myself the need to get a new set of wheels + fatter tires.