Shoot Skoolnu a PM. I think Chris was putting custom A/C lines on with his full wire tuck or he can at least point you in the correct direction.
I just need to move one hardline over. I noticed#5 has a bend where i need space for my compressor (and its bent like that for no apparent reason too) and was wondering if there is a way i could cut and flare the hard line so i can reposition the line enough to clear the turbo. The line as you can see, is over $100 so I'm not trying to buy a new one to find out how easy aluminum cracks.
Shoot Skoolnu a PM. I think Chris was putting custom A/C lines on with his full wire tuck or he can at least point you in the correct direction.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
thats the guy. I remember he had those custom tucked lines. (to keep this straight i'm only needing to move about 6" of hardline. not the whole system!)
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
this is why we pay you the BIG bucks!
Havent made it to that section of the build yet... but from what i have been looking at, you can cut and flare it, but you need a fitting with a 0 ring to seal the deal.
http://www.oldairproducts.com/catalo..._50000000.html
as for me i'm still researching
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks