Originally Posted by
gamma6
Yes i removed the rad support and just removed the top bolts of the ac condesor and radiator so i can pull slighty from top and get a bit more of reach not much but an extra inch always helps ;) haha
But yea dont pull too hard if u leave the hoses in place
As far as a bolt not going in there was a bad design for clearance on the bolts imo because i remember when i bought my used sc it had, i think, 2 bolts in place already on the bottom side that wouldnt come out... I wanted to switch since i got longer bolts to conpensate for the hondata im gasket therefore i would get the same thread engagement...
Bookmarks