I'll start
What kind of rail: Buddy Club super low
Side or base mount: Side
Pleased with product: no. Came with defect, did not include adjuster bar.
Sent from my awful auto correcting iPhone using Tapatalk
Hey guys,
Wondering if those who have aftermarket seat rails can give some input on rails.
What kind of rail:
Side or base mount:
Pleased with quality?:
Reason I ask, I got a buddy club rail for the driver side. It came faulty and the right rail would not lock. Got drop shipped from a vendor, so it's harder to deal with buddy club directly.
I'm looking for a super low seat rail for the driver. Seeing if anyone has experience with any rails other than Buddy club.
Sent from my awful auto correcting iPhone using Tapatalk
I'll start
What kind of rail: Buddy Club super low
Side or base mount: Side
Pleased with product: no. Came with defect, did not include adjuster bar.
Sent from my awful auto correcting iPhone using Tapatalk
I've used and currently still own......
What kind of rail: Nagisa Low Ep3 specific rail
Side or base mount: Side
Pleased with product: YES, but it only locks on one side. Other than that, it's the lowest rail i've ever sat in and I'm 6'4" tall with only a 30" inseam for pants aka LONG abdomen. It will even go lower than what my height is capable of supporting.
What kind of rail: Bride Ep3 specifi base mount for Brix II
Side or base mount: Base
Pleased with product: No. My hair hits the ceiling and is definitely higher up with some Brix II replicas than the RSX-S leather seats I used before.
What kind of rail: OEM RSX-S black leather seats/rails
Side or base mount: Base
Pleased with product: Yes. Low enough for my height (read above), but not quite low enough. I'd suggest trying the EM2 rails that I've heard work with the swap and drop the seat a bit. The seats also require a longer bolt and spacer on the inner most rear portion of the seat when using the RSX rails (can provide pics).
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
^ wow you've been through a few sets! Lol. I'll def look into the nagisa rail. Do you notice any seat/rail movement since it only locks on the one side.
Sent from my awful auto correcting iPhone using Tapatalk
Last edited by rd02SiR; 05-16-2012 at 07:02 PM.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
I just put my passenger seat in. Used a wedge engineering bracket and universal sliders. The universal sliders are GARBAGE!!! after 3 hours and some help, I got the seat in, but it's slightly crooked because the side mount brackets were a slight bit too narrow.
I know this. I'll be buying new rails ad brackets for each seat when the funds allow.
FUCK UNIVERSAL FITMENT!!
Sent from my awful auto correcting iPhone using Tapatalk
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
Ryan, how low are you wanting to go? I know those seats sit pretty high, so maybe you don't want adjustability, just weld it to the floor lol. If you have rails, try a sparco/wedge bracket. That bracket sits somewhat low.
Sent from my awful auto correcting iPhone using Tapatalk
I'll have to try that out.
I just want to fit in the car with a helmet. That's my goal. Right now (first thing in the morning) my hair touches the roof. In the afternoon (because of spine compression) I have less than half an inch of clearance. I can't fit in the car with a helmet. I have to tilt my head sideways, or awkwardly slouch down to fit.
I want to fit in the car with a helmet. That's it. Plain and simple. I would need 2-3 inches for that to happen.
Both the seat directly to the floor.
Ultimate low.
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks