Adding a 6th gear to stock EP3 questions

[shlobbinflobbin]

Hey guys,

So I have been lurking around the posts here and I am becoming very interested in adding a 6th gear to my EP3. I have heard it is relatively inexpensive compared to a full swap, but can anyone tell me the exact parts I will need and what I should expect to have to change to make it work relatively flawlessly? I already know about the kit from clubrsx.com, and I already have a BCSS, but I would like to know if adding the gear is going to mess with my speedometer or anything else. I also want to know if anyone could recommend a shop/mechanic in Orlando that has experience with our cars and could do the work without charging me a left testicle.

Thanks!

[Canuck Civic]

Here is a thread on it http://www.ephatch.com/forum/showthr...r-to-A3-tranny

It won't screw with your speedo. If you have Kpro just put the 6th gear ratio in there just for datalogging reasons nothing else

[kkEspana]

Oh, that's Great Sir !!

[AKEP]

for "flawless" you'll need that 5-6 gear sleeve. or it'll pop out on you for a while.