dam ! wrong section how do i move this thread to the right section
i was just looking around and i seen someone on here with an all black dash and center console i was wondering how it was done i know it was painted but what kinda paint was it if someones has done it or is gonna do it a diy would be cool or some info
dam ! wrong section how do i move this thread to the right section
a mod should move it for you. there are DIY but basically you can just pop the dash out, sand a bit, and paint with a color of your choice. i have a metallic black/gun metal on mine and it looks rad.
I have mine as black same thing mitchlikesbikes said pop it out sand it lightly and paint it your choice of color I went with black but I want to change it to matte black not really feeling the kinda shiny black
MANNY KID 15
is there any special kind of paint i should use, cuz some paints wont stick right or theyll start chipping off ?
I used trim paint...you can find it at autozone. It has a nice semi-gloss finish to it that looks stock. The black almost matches perfectly too
sick !! imma probbly do that this weekend i like how it looks thanks guys for the info
I also did the door handles and the little panel on the other door handle (idk what its called) but just make sure you sand/primer it well before painting
dam thats sick i like im for sure gonna try doing this this weekend !!
It makes a world of difference. You can use the trim paint mentioned earlier or my personal favorite, Dupli Color upholstry paint. I think its labeled vynil and interior paint. Its getting kinda hard to find as a lot of parts stores locally at least, are going to the Rustoleum interior paint, of which I am not a fan.
Dont forget to wipe down the surface with alcohol or acetone before spraying. Its amazing how much oil a fingerprint can leave sometimes.
It looks great and lasts. First rough it up with sanding a little then you some duplicolor etching primer the the color of your choice. With the primer spray a coat let it dry the lightly sand with fine paper, another coat the paint. Thats how i did mine
Sent from my SGH-T959V using Tapatalk
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks