I Got Themm!!!!!!!!

[Feng]

Neuspeeds just came in today, i'm so happy!!!!!!:D For those that installed these yourself, was it hard if you knew what you were doing? i have a friend that is going to do it this weekend, he works on all different cars, but this is the first Ep he's going to be working on, hope its not a pain. Anyone have any advice????? thanks

[HondaMan]

Try this recent thread:
http://www.ephatch.com/forum/showthr...&threadid=6895

And there is many others like it via the search feature. ;)

[pobanaitsa]

where did you get them and how much did you pay for them? i am also interested in these springs. thanks

[IceD out N CALI]

good choice in springs-good luck on the install

[Suk02Si]

http://ephatch.com/forum/showthread....&threadid=5913
Watch out, use bungee cords or rope to hold up the hub knuckle so the driveshaft doesn't get pulled out.

[Whooopasss]

pay attention to which part goes to where.. when you disassemble the strut, make a note which goes in first.. bring a lot of grease too.. you will need it for the front.. trust me..

[HondaMan]

Originally posted by Whooopasss
pay attention to which part goes to where.. when you disassemble the strut, make a note which goes in first.. bring a lot of grease too.. you will need it for the front.. trust me..

Excellent advice!