Shouldn't be too long.. Going Turbo!

[Bryan144]

I have been researching and researching and researching trying to find any information and all information I can find on turbos and set ups and well everything! Read through Turbo 101/102/103 and I've got a pretty good understanding of it all. If someone could double check my work (link below) I would greatly appreciate it. Below is an outline I created to go along with my research. It starts with reasons/use for a turbo and then lists parts (in no particular order) that I have put together with estimated prices! If someone could (maybe you know some points I need to know) put some input out here and review the list of parts I have created and maybe update my pricing and suggest parts I need to add with pricing (preferably). Some parts aren't "needed" but maintenance is required so I figured a few of the parts would just be good to go ahead and replace.



Turbo Decisions
1. Determine what the turbo will be used for;
a. Daily Driver
b. Power Enhancement (hauling multiple people/luggage)
c. Drag Strip
2. Determine amount of power desired;
a. Horsepower: 230-280
b. Torque: 220-280
3. How do I want the turbo to react?
a. Spool Range (3500rpm to 7500rpm[redline]) (Just an off the top of the head range)
b. Mid-ranged power (not all low end but not all high end)
4. Pricing and parts needed;
a. Hondata K-Series 4 Bar Map Sensor
i. Use; For going over 10 lbs of boost
ii. Price; 99.00 + Shipping
b. 600+cc Fuel Injectors
i. Use; Allow more fuel output
ii. Price; 329.00(for 600cc)
c. WALBRO 255 LPH Fuel Pump Kit
i. Use; More fuel output
ii. Price; 99.00 + Shipping
d. Silicone Connectors (pipe connectors)
i. 3”-2.5” Silicone Reducer
1. Use; Piping Size Changes
2. Price; 10.00
ii. 2.25” diameter by 3” diameter 4ply Silicone Coupler(s)
1. Use; Connect Piping
2. Price; 10.00-20.00 (may need a few)
e. Napa Radiator Hose
i. Use; Piping clearance/Battery clearance
ii. Price; 16.00 + Shipping
iii. Part Number; NBH 7940
f. Turbo Kit w/ Intercooler
i. Use; Boost/Air Cooling
ii. Price;
1. EMUSA 675.00 + Shipping
2. GReddy
3. Turbonetics
4. Other
g. 38mm Dump Tube (Wastegate application)
i. Use; Run excess exhaust gasses to wastegate
ii. Price; 30.00 – 60.00 + Shipping
h. F1 Racing Clutch Kit & Flywheel
i. Use; Clutch/Flywheel
ii. Part number; F1-54025R3-SS & 54025FX-HT
iii. Price; 410.00 + Shipping + Installation
iv. Specs; 318 HP/294 TQ (clutch capacity)
i. MAC Boost Solenoid
i. Use; Controls Boost amounts in turbo
ii. Price; 30.00 – 60.00 + Shipping
j. 3 Hole A-Pillar Gauge Pod
i. Use; Gauge holder
ii. 20.00 – 50.00 + Shipping
k. Boost Gauge
i. Use; View boost amount
ii. Price; 50.00 – 100.00 + Shipping
l. AEM Wideband Air to Fuel Ratio Gauge
i. Use; Manage air to fuel ratio (Monitor atf ratio)
ii. Price; 200.00 – 300.00 + shipping
m. Oil Pressure Gauge
i. Use; Manage oil pressure (Monitor oil pressure)
ii. Price; 20.00 – 50.00 + Shipping
n. Unorthodox Racing Performance Pulleys
i. Use; Reduce engine strain
ii. Price; 285.00 + Shipping
o. Spark Plugs (1 or 2 Steps Colder)
i. Use; Reduce heat in the combustion chamber
ii. Price; 50.00 – 150.00 + Shipping
p. Timing Belt
i. Use; Replace worn belt
ii. Price; 75.00 – 200.00 + Shipping
q. Kpro
i. Use; Tuning
ii. Price; 995.00 + Shipping
r. Intake Filter w/ 3” piping
i. Use; Keep dirt out of turbo/engine
ii. Price;
1. Piping; 20.00 – 100.00 + shipping
2. Filter; 15.00 – 50.00 + Shipping

[rhdsirek4]

Big plans bro, good luck!

[Bryan144]

Big plans bro, good luck!

Thanks! I'm hoping maybe a few people will chime in and throw in a pointers, maybe some more needed/advised parts and update some pricing!

[rhdsirek4]

one step at a time bro.... make sure you got $$$$.. cause youre going to need lots of it!:)

[superchargedk20]

Hopefully he buys my motor. I'll text ya tomorrow with the shipping quote !