Hello Ephatchers!
I have an issue with my k24a2 swapped ep3. I've been working with AKEP trying to figure this problem out..
Okay here's the issue: Cruising in town I register a knock here and there via datalogging, yet the MIL will never turn on. At WOT there seems to no more knocking (Thanks tony!!)
However, everytime - without fail cruising on the highway the MIL lights up and throws a p0325 (knock sensor circuit malfunction). It always seems to happen as I pass 50-60mph and let off the throttle. I've tested the knock sensor, and it seems to functioning properly.
I've provided two datalogs that demonstrate this phenomenon. Any insight as to what could be causing this problem would be much apprecited, and any help will also be much appreciated
The motor is a 08 k24a2 with dcracing headers, RBB intake manifold and a short ram (really hot air lol) lntake.
http://www.datafilehost.com/download-678a678a.html
http://www.datafilehost.com/download-f070001b.html
Seems to be a problem with the knock sensor or circuit. The datalog shows a constant knock level that doesn't fluctuate, which it should.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks