Yes, it will bolt right on but it's not a good idea to actually use it. EM2's are around 300 lbs lighter than the EP3 so your car will handle like shit if you use it. Any EM2 suspension setup is most likely way too soft for an EP3.
Will EM2 suspension work on my ep3?
Yes, it will bolt right on but it's not a good idea to actually use it. EM2's are around 300 lbs lighter than the EP3 so your car will handle like shit if you use it. Any EM2 suspension setup is most likely way too soft for an EP3.
Time to shed 300 lbs off your car lol
it may ride a little lower & you may see one end of the car sag a little more then you'd like (differences in weight distribution ratios).
Else, the added weight of the EP3 will make the car ride smoother...
thanks everyone for the insight. i guess my search continue for stock suspension. :(
this is a better choice if you want stock suspension http://forums.clubrsx.com/showthread.php?t=852153
can't beat 60 bucks and he's local
or
http://losangeles.craigslist.org/wst...704657146.html
http://losangeles.craigslist.org/sfv...697700883.html
Last edited by theMan_ny; 03-28-2013 at 04:47 PM.
yea i would rather get dc5 suspension since they better spring rates
em2<ep3<dc5
is its a direct fit or will i have to do some light mods? thanks
You'll need RSX tie rod ends and you'll need to shave the lower rear shock bushings a little
cool, thanks
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks