troubles with my k24a4 swap

[michael_lo]

Alright fellas....
I recently did a k24a4 swap into my ep3 and was wondering if the coolant port on the accord head next to the intake manifold can be blocked off with just one of the hose going to the thermastat?
is this possible or do I have to find a adapter for both???

[captaingamez]

you need the bypass hose that goes to the thermostat, but you can delete the heater line.

[michael_lo]

alright thanks for the info...

[michael_lo]

do u know what size plug i can use for my egr port?

[captaingamez]

got me on that one someone else might know, I did a K24A1 swap so I didnt mess with any EGR stuff on it.

[2004ep3hatch]

do u know what size plug i can use for my egr port?

If I'm thinking I know the part, you can block the EGR port with a block plate. Or you can buy a water passage for it and replace the whole thing.

[2004ep3hatch]

Are you talking about this below? You can buy a block of plate.

image.jpg