Garret t3 60/1 ??

[EDU]

Will this turbo be to big the ep3? started to piece a kit together and found a good deal on this exact same turbo.
Garret t3 60-1
im just trying to hit around 300hp first and then upgrade components and or engine so i was thinking this turbo will give me some room to grow and upgrade keeping the same turbo.

http://www.full-race.com/store/turbo...0-1-turbo.html

thank you for the help.

[USAF EP3]

Great choice of turbo. If you want the room to grow, the .82A/R turbine housing is a good choice.

If you were going to keep the A3 I would've suggested to keep the A/R of the turbine housing slightly smaller to help with spool time, but since you're planning to build around the turbo later the .82A/R will help you reach peak HP goals with a more efficient and/or higher revving engine.

[EDU]

anybody else?

[gtimportfanatic]

its a fairly large turbo for the power goal, try to use a .63 A/R if you decide to use it.. best luck i've seen is with a t04E or a precision 5431.

[gtimportfanatic]

besides the precsision and turbonetics units you will probably get for less..

http://www.precisionturbo.net/turboc...--5431E-MFS/58

or u can check these guys too

http://www.compturbo.com/products/ct2