Close

Results 1 to 10 of 10
  1. #1
    J_Bones team ERA 5's Avatar
    Join Date
    Nov 2002
    Location
    san diego
    Posts
    1,218

    Anyone have a how-to replace serpentine belt

    Thanks in advance.

  2. #2
    4 TDs in Single Game usedep3's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    2,314
    it's 4-20 and 4-26 in the helms.

    You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

    It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
    Green Crew #7

    Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals

    Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2

  3. #3
    Stay Lurkn... Sucka's Avatar
    Join Date
    Apr 2008
    Location
    Westminster,CA
    Posts
    1,805
    Quote Originally Posted by usedep3 View Post
    it's 4-20 and 4-26 in the helms.

    You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

    It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
    Hi Jim!

    Follow Mike's instruction. It's super easy!

  4. #4
    J_Bones team ERA 5's Avatar
    Join Date
    Nov 2002
    Location
    san diego
    Posts
    1,218
    Sounds like a plan. Thanks guys! My belt looks like bacon! Lol
    Last edited by dumblehead; 05-05-2009 at 05:09 PM.

  5. #5
    4 TDs in Single Game usedep3's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    2,314
    It's a lot easier than you'd expect.

    J, if you need a copy of the helms let me know.
    Last edited by usedep3; 07-19-2013 at 09:34 PM.
    Green Crew #7

    Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals

    Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2

  6. #6
    Stay Lurkn... Sucka's Avatar
    Join Date
    Apr 2008
    Location
    Westminster,CA
    Posts
    1,805
    Quote Originally Posted by team era 5 View Post
    sounds like a plan. Thanks guys! My belt looks like bacon! Lol
    bacon strip!

  7. #7
    Registered User SiBoosting11's Avatar
    Join Date
    May 2010
    Location
    New York
    Posts
    74
    Quote Originally Posted by usedep3 View Post
    It's a lot easier than you'd expect.

    J, if you need a copy of the helms let me know.
    Could you send me a copy of the helms plz?

  8. #8
    Registered User
    Join Date
    Jun 2009
    Location
    Henrico, Virginia, United States
    Posts
    65

    Is there a specific brand like oem or any auto part store belt will do?

    Quote Originally Posted by usedep3 View Post
    it's 4-20 and 4-26 in the helms.

    You need a 14mm wrench to turn the bolt on the autotensioner clockwise (this releases the tension on the belt). Then you just wrap the belt as shown on page 4-20

    It makes its much easier if you take off the passenger side wheel and the liners by the crank/belt.
    Aa

  9. #9
    Registered User KaManDew's Avatar
    Join Date
    Oct 2013
    Location
    Naples
    Posts
    18
    *A 14mm wrench and another larger wrench for leverage.

  10. #10
    Registered User
    Join Date
    May 2022
    Location
    Florida
    Posts
    1
    Finally, because they haven't been broken in yet, leather belts might seem a lot tighter when you first get them, but this will improve over time.
    gyms to go

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •