Megan Racing coilover straight arm.

[lordofthesiths]

I didn't realize the meagan coilovers i ordered where the straight arm ones. The pic on the site i ordered from shwed the bent ones. So my question is do i need to use the roll center adjusters "extended ball joints"? I dont plan on going to low. I already have the Megan roll center adjusters but don't want to use them if i dont need to. Also once i have everything installed im going to get an alignment. whats a good setting for a daily driver for alignment and camber?

[black05ep]

The RCA's aren't for the coilovers. They are for your front Lcas they correct the angle of them. They aren't needed but when u lower the car its going to put stress on the lower ball joint. The straight arms are good because it keeps your steering rack low.

[lordofthesiths]

Ok for some reason i was thinking the ball joints allso affected the angle of the tierods.

[black05ep]

Not that I am aware. If they do its minimal.

[mussh]

I have the megan coil over.

I used the megan roll center adjusters and moog tie rod ends.
I have a 0 toe and my car rides pretty nice.

I would put the roll center adjusters on.

[black05ep]

Yea. If u gotm. Might as well use them.

[lordofthesiths]

Ok cool. Thanks guys