JRSC & me : )

[tlikethedrink]

I had previously started a greddy turbo build up thread... got ancy in the pantsy and ended up trading for a JRSC with a few pulleys... street, race 4.0 and the 3.8 which is installed now. Posted this on the FB thread... a few weeks ago when i traded. Kit came with the modified stock tensioner and the Rsx idler pulley. What should I run and what belt size?



I plan on running the 3.8. and would like a little help from the experienced. Ill take all the help/advice I can get! (Run 4.0)

Intake: I just bought and installed a 3" fujita cold air intake. Love it. With the stock exhaust you can really hear this thing snarl!



Exhaust: 60mm catback with a DC sports Stealth muffler (identical to the Vibrant). Car also has the Megan shorty and DP (cat-delete) on. Its a little loud, but all in all its a decent set up i think. i do plan on a race header down the road. i just want to get this thing going. Probably be installing a big resonator and maybe replace the glasspack style res to get the drone down for road trips...


Edit: race header purchased! Needed a little tlc, but I cleaned it up and painted with ceramic paint. Looks good as new. Finish result pics.

Fuel: I have Kpro and plan on modifying the stock injectors to "490s". most likely will mod them to and run them as 475-480s in Kpro. I would like to buy injectors that are already modded so I can keep my stockers. Let me know if you got a set.( DONE!)



KAL: I need one... Don't know where to start. If nothing else Ill slap the 4.0 pulley on and use the map in kpro. But I'm not sure the injector set up even if I change the injector size. (Going to run KPRO KAL on 4.0)

On my to do/buy list I have:

Thermostat- may as well do with a everything out of the way.
_X_Napa upper rad hose to clear the intake and help with the temps.
_X_ Rsx-s spark plugs- iridium pre gapped
_X_Boost gauge- I have an autometer but I need the lines/fittings and light. Ordered a pod to mount on the steering wheel.
_X_SC oil change- ordered oil today. Will change when it comes in!

Is there anything else i shoudlI should do? Install tips other than removing the radiator?
Pics soon!