You should be able to use a Type S flywheel and pretty much any corresponding clutch kit.
Anyone know what other Clutches are interchangeable with the element (k24a1) .
My DD clutch is going bad, i'd like to pick up a replacement on the cheap from some forums.
You should be able to use a Type S flywheel and pretty much any corresponding clutch kit.
^yeah that! I accidentally bought a type a clutch instead of the type s. however there are more options for the type a than any other model k series car so just pick up a type flywheel and any clutch you want. Otherwise good luck finding a Crv one.
What flywheel are you using? There are two different types of K series manual flywheels. You have the K20A3 style which has the dowel alignment pins offset from the pressure plate bolt holes and then there are the K20A2/Z3/Z1 etc. flywheels that have the dowel pins centered in between the bolt holes.
They are not interchangeable so take note on which flywheel you have.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks