Help! Shifter won't go into gear

[Smooth EP3]

This afternoon I went out to my car, pressed in the clutch and something made a popping noise. I then crunk the car and it started. I tried to put it into gear, but it won't let me. When I press the clutch now, there is no resistance.

Any help would be appreciated.

[captaingamez]

You should follow your clutch master cylinder line to the slave cylinderand see if anything is wrong, otherwise you blew up something in the clutch pack, likely your release fork. No idea why that would happen, but thats what it sounds like.

Your transmission is going to need to come out if you dont see anything wrong with the master/slave cylinder

[Smooth EP3]

captaingamez, thanks for you reply. I'm leaning towards the clutch. Is this the clutch I need? Part# KHC10

http://www.amazon.com/EXEDY-KHC10-OE...ype=automotive

[USAF EP3]

captaingamez, thanks for you reply. I'm leaning towards the clutch. Is this the clutch I need? Part# KHC10

http://www.amazon.com/EXEDY-KHC10-OE...ype=automotive

That only fits the Type S/Type R flywheel. Unless you plan on installing that flywheel, you will need to order the K20A3 specific clutch kit. This is what you need:

http://www.kseriesparts.com/cr/EXE-KHC09.html

[Smooth EP3]

Thanks a bunch, USAF EP3!

[captaingamez]

Yeah, and definitely go with the Exedy, dont wanna have to do it twice!.