I did the headliner in my daughters 01 sedan. remove the trim and lights, pull the headliner out thru the hatch and lay it face up on a table that you don't care if it gets stuff on it. remove the cloth, the foam backing, and as much old glue as you can. cut the cloth bigger than you need it, lay it over the headliner and fold half of it back on itself. get 3m extra heavy duty headliner spray adhesive (the regular stuff will fall). spray that on the back that is folded and also on the cleaned headliner shell. let it sit a few minutes to get tacky, and with help, pull it over the glued side (it is best with 2 people holding the corners, so you can fit it). start at the center fold, pressing it down to the headliner shell, working center out. keep it snug but not tight. when you get it all down, repeat with the other side. when you trim out the holes, the fabric will have enough glue to hold the extra behind the shell.
Bookmarks