Pictures of the modded USDM front and rear rebar for JDM bumpers

[2004ep3hatch]

Hey guys, although I'm running the JDM rebar, I did mod my USDM ones. Here are the photos to see them finally. Seems no body dose this.

Front:









Pretty much your trimming the ends off, pretty straight forward.

Rear:










The bottom is a unmodded JDM rear rebar. You can see much it needs to sit in.


Here is the bumper on with nothing to see how little room there is.

Basically for the rear, you have to cut mounts off and move the forward on the center part of the bar thus bringing the arch of the bar closer to the chassis. Mine was not moved enough, so I had cut the hump out and re welded a steel plate.

Notes:
When running the facelift bumper and lip with fogs, you need to move the horns or the hit the fog lights.