Close

Results 1 to 12 of 12
  1. #1
    Registered User BecauseDaily's Avatar
    Join Date
    Dec 2014
    Location
    Canada
    Posts
    4

    Car Shaking Problem

    When I accelerate hard, the front end of my car shakes. All I have done is Bc Racing Coilovers and exhaust. What would cause this problem?

  2. #2
    Registered User OZZYG_EP3's Avatar
    Join Date
    Jun 2013
    Location
    New Jersey
    Posts
    68
    possible alignment or wheel balancing?

  3. #3
    Registered User Hasbro's Avatar
    Join Date
    Nov 2006
    Location
    Hilton Head Island, S.C.
    Posts
    1,431
    Did it start after you changed something? Check your engine mounts.

  4. #4
    Registered User BecauseDaily's Avatar
    Join Date
    Dec 2014
    Location
    Canada
    Posts
    4
    I got a wheel alignment and wheels balanced. when I got my snow tires, it was shaking, so I went back and got them rebalanced, it was still doing it. But I'm still having a feeling it's that. My motor mounts look fine.

  5. #5
    Registered User Her-Name's-Ally's Avatar
    Join Date
    Jun 2012
    Location
    La Habra, CA
    Posts
    620
    Make sure your lugs are tightened properly. Go in the star pattern. Also check the strut bolt is tight under the hood.

  6. #6
    Registered User Her-Name's-Ally's Avatar
    Join Date
    Jun 2012
    Location
    La Habra, CA
    Posts
    620
    maybe the tires themselves.

  7. #7
    Registered User cja3455's Avatar
    Join Date
    Mar 2014
    Location
    austin
    Posts
    32
    if it's happening only under hard acceleration not when cruising at speed, I would also suspect an engine tuning issue; like bad spark plug/ignition coil, a clogged fuel injector, or dirty air filter. When the engine is missing something for combustion, it will start shaking and under hard acceleration you'll need to deliver a lot of fuel/air/spark into the engine suddenly

  8. #8
    Registered User BecauseDaily's Avatar
    Join Date
    Dec 2014
    Location
    Canada
    Posts
    4
    Ok I'll go check the lug nuts and strut bolts. I have a velocity stock on with screen door mesh for filtering lol

  9. #9
    Registered User Her-Name's-Ally's Avatar
    Join Date
    Jun 2012
    Location
    La Habra, CA
    Posts
    620
    It can also be the bearings too. I had to replace mine at 120k

  10. #10

  11. #11
    Registered User BecauseDaily's Avatar
    Join Date
    Dec 2014
    Location
    Canada
    Posts
    4
    Sweet thank you very much!

  12. #12
    Registered User Her-Name's-Ally's Avatar
    Join Date
    Jun 2012
    Location
    La Habra, CA
    Posts
    620

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •