Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Jan 2015
    Montreal, Quebec

    HID 02 to 04 setup

    Hey guys and girls,

    I was searching for this and I wasn't really able to get a conclusive way of doing it. I have an 02 EP3 with projector HIDs. They work great. I am able to get some 04 headlights for a good price. What do I need to do to make this work. I would be using the HID projectors for low beam only. I have the H4 setup now with the high/low switch. Any information would be greatly appreciated.



  2. #2
    Don't think too hard 2004ep3hatch's Avatar
    Join Date
    Jul 2004
    Retardville P.A
    I know this is a late response. You basically need a male 3 prong plug with 2 connectors branching off of it. the positive will go to both connectors. one being low beam and other being the high beam. now the ground from the main harness will only go to the low beam. the high beam ground, you ground to the chassis. This allows flashing to pass.

    If you need more info, Just PM me. this was a basic writeup.
    Supercharged K24 Frank powered
    PM a Moderator for assistance anytime

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts