Close

Results 1 to 5 of 5

Thread: Please help

  1. #1
    Registered User
    Join Date
    Apr 2015
    Location
    New York City
    Posts
    3

    Please help

    Im really digging these wheels i found but they are wide so is it possible to run 17x9 +25 all around with a 205/40R17 lowered about 2 inchs on springs without doing alot of work ? What would i have to do specifically ? Roll front & rear or just rear ? And camber front and rear or just rear ? I don't mind stretch tires and rear camber so much. I just want to see how much work will i have to put in it to make it look good.

  2. #2
    Registered User Hasbro's Avatar
    Join Date
    Nov 2006
    Location
    Hilton Head Island, S.C.
    Posts
    1,431
    I don't know of an EP3 that has done those tires - they are very narrow with about 23.5" diameter. They shouldn't be hard to fit. You sure you want to go with that size? That's a 7" tread on a 9" wheel. I'll keep my opinion to myself on this one.

  3. #3
    Registered User Hasbro's Avatar
    Join Date
    Nov 2006
    Location
    Hilton Head Island, S.C.
    Posts
    1,431

  4. #4
    Registered User
    Join Date
    Apr 2015
    Location
    New York City
    Posts
    3
    I seen it on other ep3 on the internet, i just want to know if i have to camber/roll fenders to fit them.

  5. #5
    Registered User
    Join Date
    Apr 2015
    Location
    New York City
    Posts
    3
    I also have the option on running 17x8 +30 on a 205/40R17 but if the 17x9 wont give me too much trouble i rather go with that

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •