Close

Results 1 to 3 of 3
  1. #1
    Registered User
    Join Date
    Dec 2018
    Location
    Iowa
    Posts
    5

    How to Install ID1050x injectors k20a3?

    Anybody make a thread on how to install these? I cant find it. if someone can drop link to it that would be great :).

  2. #2
    Dope Whore 麻薬中毒の娼婦 dustyboner's Avatar
    Join Date
    Apr 2008
    Location
    nm
    Posts
    112
    unless they are different than the ID1000s, it really simple. just relieve the fuel pressure, unclip the fuel line from the rail, unplug the injector connectors, take out the 2 bolts holding the rail to the manifold, pull the rail (with injectors attached) from the intake manifold, pull the clips securing the injectors to the rail, pull the injectors out of the rail (it can be a bitch to get them to pull out).


    here ill just post up the section of the FSM. the only other thing is if you don't have adapter for the electrical connectors you will need to cut the old ones and wire in new ones. If you need to wire in new ones, on each injector, the yellow/black wire on the harness connects to the postitive (+) on the new connector.
    (click for full size)

    here are a few pics:


  3. #3
    Registered User
    Join Date
    Dec 2018
    Location
    Iowa
    Posts
    5
    Thanks for the help man! They were tough taking the oem ones out with all the grime that was packed into the holes. Ended up breaking one of the injectors pulling them out. But i got em.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •