Close

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Dec 2019
    Location
    California
    Posts
    1

    DC5 Megan Coilovers on EP3

    So I've been searching through the forum and other sites on how to go about installing DC5 coilovers on a Ep3. People are saying to shave the rear bushing of the coilover so it'll fit and others are saying to drill. Am I making the diameter of the bushing bigger or am I grinding the bushing down, or am I drilling the hole where the bushing sits in? I've read that 3mm is the magic number. I'm new to this so sorry for any inconvenience.

    EDIT* I know that I need to get the RSX tie rod ends for the front.

  2. #2
    Registered User
    Join Date
    May 2019
    Location
    California
    Posts
    24
    Quote Originally Posted by Mavis View Post
    So I've been searching through the forum and other sites on how to go about installing DC5 coilovers on a Ep3. People are saying to shave the rear bushing of the coilover so it'll fit and others are saying to drill. Am I making the diameter of the bushing bigger or am I grinding the bushing down, or am I drilling the hole where the bushing sits in? I've read that 3mm is the magic number. I'm new to this so sorry for any inconvenience.

    EDIT* I know that I need to get the RSX tie rod ends for the front.

    yes for the fronts you need rsx tie rods and for the back u need to grind down the bottom of the rear shock where the bolt goes in because the rsx is thicker

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •