Here is something to check. So, I’ve been in your predicament before with my EP3. Car wouldn’t start. Wouldn’t crank, no clicking noise. I happen to be stuck near an auto store and they were only able to check battery, but no issues. Was able to push my car and pop the clutch to get it started. Got home and wouldn’t start up. I had replaced the battery and alternator several months before so my guess was the starter. Took it off and had auto store check it, no issues with it. Long story short....it was the clutch pedal switch (or clutch safety switch). Whatever it may be called, it is a switch at the top of the clutch pedal that gets pressed-in to allow the car to start. You can test by pushing the switch in with your finger and starting your car. Make sure you are in neutral before you do this. Sometimes it will not get pressed-in enough. I ended up just disabling mine.
If that doesn’t work, it was just one more thing to check off your list.
Bookmarks