Close

Results 1 to 11 of 11
  1. #1
    "VTEC BRO!!!" 95 GSR's Avatar
    Join Date
    Dec 2002
    Location
    Van Nuys, SoCal - 818
    Posts
    1,221

    Bottle warmer F/S??

    Anyone selling a bottle warmer?? or know a place that sells it for cheap???

  2. #2
    ephatch member pocketrocket's Avatar
    Join Date
    Nov 2002
    Location
    Toledo, OH
    Posts
    427
    Bottle warmers are dangerous. If the thermostat should fail, it could cause bottle temps to increase far beyond intened bottle pressures, and resulting in a nice blue gernade.
    I just have a bottle blanket and crank the heat up in my car before I spray.. (If it's that cold).

    -PR

  3. #3
    ssvr6
    Guest
    Originally posted by pocketrocket
    Bottle warmers are dangerous. If the thermostat should fail, it could cause bottle temps to increase far beyond intened bottle pressures, and resulting in a nice blue gernade.
    I just have a bottle blanket and crank the heat up in my car before I spray.. (If it's that cold).

    -PR


    Even though it may have seemed that his question was about the safety of logic of using a bottle warmer, I'm pretty sure that he's just looking for a good deal.

    As for what you said, I disagree completely. A plastic spork could be consdiered deadly when not used as intended. If you install and use products correctly (as well as check them when doing regular maintenace) you won't have any problems.


    Steve

  4. #4
    ephatch member pocketrocket's Avatar
    Join Date
    Nov 2002
    Location
    Toledo, OH
    Posts
    427
    I meant to imply that a cheap bottle warmer may not be cheap if his bottle blows up. You get what you pay for, and there have been experiences in the past where cheap bottle warmers have malfunctioned and overheated the bottle. A plastic spork may very well malfunction, but the most likely cause is a ruined pudding...(or whatever one might use a spork for.)

  5. #5
    ssvr6
    Guest
    Originally posted by pocketrocket
    I meant to imply that a cheap bottle warmer may not be cheap if his bottle blows up. You get what you pay for, and there have been experiences in the past where cheap bottle warmers have malfunctioned and overheated the bottle. A plastic spork may very well malfunction, but the most likely cause is a ruined pudding...(or whatever one might use a spork for.)

    I understand what you're saying, but again, I don't think that's he's looking for cheap products as much as he is looking for inexpensive good products.

    Steve

  6. #6
    "VTEC BRO!!!" 95 GSR's Avatar
    Join Date
    Dec 2002
    Location
    Van Nuys, SoCal - 818
    Posts
    1,221
    Originally posted by pocketrocket
    Bottle warmers are dangerous. If the thermostat should fail, it could cause bottle temps to increase far beyond intened bottle pressures, and resulting in a nice blue gernade.
    I just have a bottle blanket and crank the heat up in my car before I spray.. (If it's that cold).

    -PR
    Thats what a nitrous pressure gauge is for. ;)

  7. #7
    ephatch member pocketrocket's Avatar
    Join Date
    Nov 2002
    Location
    Toledo, OH
    Posts
    427
    Valid Point. Personally I just don't trust 'em. But if I were to look for one, I'd check over on clubsi or ebay.

    -PR

  8. #8
    "VTEC BRO!!!" 95 GSR's Avatar
    Join Date
    Dec 2002
    Location
    Van Nuys, SoCal - 818
    Posts
    1,221
    ok, kool. thx man.

  9. #9
    ephatch member
    Join Date
    Jan 2003
    Location
    Please Update
    Posts
    462
    Nitrous express actually has a very nice bottle warmer that warms according to the psi of the bottle...that way the PSI is almost always at 90 =)

  10. #10
    Honorary Member CSMsi311's Avatar
    Join Date
    Feb 2003
    Location
    Colorado
    Posts
    310
    i've been helping out my friend with his nitrous. do you mean 90*F? b/c his gauge on his bottle reads around 600-700 psi cold and around 1000 psi warm. I'm pretty sure the units for the gauge was psi.

    Just Curious
    Jason

  11. #11
    "VTEC BRO!!!" 95 GSR's Avatar
    Join Date
    Dec 2002
    Location
    Van Nuys, SoCal - 818
    Posts
    1,221
    i think he meant 900psi...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •