top of connector
_______
[1][2][3]
-----------
1=SG2 green/yellow (signal for fully closed 0.5v or 0.5-0.9k ohm)
2=Ground red/black
3=VCC2 yellow/blue (signal for fully open 4.5v or 4.5k ohm)
correct me if I'm wrong.
i need to know which wire on the tps sensor is the signal wire
Last edited by ron; 02-21-2003 at 04:38 PM.
top of connector
_______
[1][2][3]
-----------
1=SG2 green/yellow (signal for fully closed 0.5v or 0.5-0.9k ohm)
2=Ground red/black
3=VCC2 yellow/blue (signal for fully open 4.5v or 4.5k ohm)
correct me if I'm wrong.
thanks
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks