You have no cat,are you running an o2 simulator? By the way you said headerS, I am only aware of one.
after i put in my dc race headers n then couple weeks later my engine light keeps coming on so then i go to read the code and it tells me something about my catalyst system bank 1? So then i just deleted the code but every once a week it keeps popin up at me, anyone know wat this is?
You have no cat,are you running an o2 simulator? By the way you said headerS, I am only aware of one.
AKA Defouler.
There's a couple guys that sell them on ClubRSX for pretty cheap.
You can make them yourself for about $4.
1. Buy a pack of Help! 42009 Spark Plug Non-foulers.
2. Drill out the middle hole on one of the non-foulers with a 1/2" drill bit.
3. Screw your secondary o2 sensor into the top of that drilled out non-fouler and it should fit in there almost perfectly.
4. Now take that non-fouler/o2 combo and screw it into the top of the UNMODIFIED non-fouler.
5. Screw the whole thing into the second o2 bung on the RH and plug the o2 sensor back in and you're done.
It will look like this when you're done:
o2 Sensor = Drilled out non-fouler = unmoddified non-fouler = RH
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks