what intake are you using?
Here is a pic showing the difference between the OEM EP3 upper rad hose and the "new" upper rad hose from NAPA part#7940. Notice how it clears the intake completely! This has been used with success on CAI, SRI's and turbo set-ups.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Injen
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
the Samco hoses gave me quite a bit of clearance also, it has a smaller outside diameter than stock. your method looks to work well also (whatever gets that hot hose off the charge pipe:thumb:)
Wow siborg your aviator is sex:thumb:
Im about to stop and get one tomorrow. Anybody know if it clears the RBC with a RSX S Fujita CAI? Cause my rad hose is sitting on my CAI tube!
$14 Ordered it today. It'll be there tomorrow morning. Hopefully it helps, The hose on there now is bent around the top of the intake tube. It's not kinked or anything tho
YEP it will totally clear the RSX S Fujita CAI, it is so similar to the Injen CAI that they could be called clones of each other.
Last edited by talonXracer; 06-05-2008 at 02:18 PM.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Went to pick it up this morning but it didn't come in so im gonna get it tomorrow
Not that it will do me any good, i snapped my drivers side axle tonight at the track
Link to how it happened
http://www.ephatch.com/forum/showthr...954#post598954
Last edited by K20A EP3; 06-06-2008 at 10:12 PM. Reason: Add Thread Link!
can't feel it but I'm sure it's better, atleast the charge pipe isn't scorching right at the T.B. after being intercooled not the best or the closest shots, I'll try to find a better one or just take a new one. Here ya go for now.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks