cusco rear =25.0 solid bar
The Hotchkis bars are hollow...they also sell a 27.0mm hollow rear bar for autoX.
Work in progress. post up what you know and i'll add to this list. i'm still working on the formatting too.
Front / Rear
2002-2003 Si
F- 25.4
R- 15.0
2004-2005 Si
F- 25.4
R- 17.0
2002-2004 RSX Base & Type S
F- 23.0
R- 19.0
2005-2006 RSX Base
F- 25.4
R- 19.0
2005-2006 RSX Type-S
F- 26.5
R- 21.0
2001-2006 Integra Type R
F- 26.5 or 23.0 (finding conflicting info) ONLY for use with DC5R LCAs
R- 22.0
2001-2006 Civic Type R (Ep3)
F- 25.4
R- 22.0
2002 Honda Civic EX
F- 15.9
Neuspeed
F- 27.0
R- 22.0 w/Tie Bar
Hotchkis
F- 25.4 (adj.)
R- 25.4 (adj.)
Setting 1 59% 71%
Setting 2 168% 180%
Hotchkis Competition
F- 25.4 (adj.)
R- 27.0 (adj.)
Comptech
R- 22.0 w/Tie Bar
H&R
F- 26.0
R- 20.0
Eibach
F- 25.0
R- 23.0
Progress
F- 27.0
R- 22.0 w/tie Bar and 24 w/tie bar (rsx. might fit?)
Tanabe
F- 27.0
R- 22.0
ASR
R- 32.0
Toda
F- 25.0
Cusco (DC5R specific)
F- 25.0 (ONLY for use with DC5R LCAs)
R- 25.0
Whiteline
F- 25.5
R- 24.0 (adj.) or 22.0 (non adj.)
Swift (DC5R specific)
F- 130% stiffer than stock (no mm rating) ONLY for use with DC5R LCAs
R- 119% stiffer than stock (no mm rating)
Ultra Racing (DC5R specific)
F- 25.0 (ONLY for use with DC5R LCAs)
R- 25.0
Buddy Club (DC5R specific)
F- 25.5 (ONLY for use with DC5R LCAs)
R- 25.0
Mugen (DC5R specific)
F- 24.2
R- 24.0 or 25.0
Suspension Techniques
F- 20.1
R- 25.4
Tanabe Sustec
F- 27.5
R- 22.0
Updating this list for Powdbyrice........signed MugenReplica
Last edited by MugenReplica; 12-20-2010 at 09:16 PM.
cusco rear =25.0 solid bar
The Hotchkis bars are hollow...they also sell a 27.0mm hollow rear bar for autoX.
did we come to the conclusion that the rsx rear would fit on our cars??
Does anyone know where I can buy the Progress 24mm adjustable rear sway w/ tie bar? I remember like a little over a year ago there was a group buy so I jumped on it. When I parted out I sold it and now that I want it back I can't find it anywhere. Every place I look only has the 22mm.
the EM2 front sway fits our cars too, and its 15.9mm
Paired with a thicker rear sway it really helps reduce understeer.
part# is 51300-S5D-A02 SPRING, FR. STABILIZER from the 2003 Civic EX.
The lower models had thicker front sways
51300-S5D-A11 SPRING, FR. STABILIZER (25.4MMX4.5)
remember, softer up front means better grip.
Last edited by thechromecoyote; 06-30-2008 at 11:22 PM.
Ooh... found this!
http://www.geocities.com/bellz252/ar...ybarspecs.html
http://www.clubrsx.com/cr/PRO-62-0103-p-ARSXSSWB.html?
Is this what you're looking for?
Basically, in doing their job, anti-roll bars increase the load the outer tire carries in a turn... meaning they reduce the maximum potential traction that end of the car can make.
Potential being the key word here, as there are other factors at play.
Also note that Outer Diameter (OD) of an anti-roll bar doesn't really tell you much as far as how strong or weak it is, particularly when trying to compare them to other brands.
51300-S5D-A02 will fit for sure? i tried one off a civic coupe from a junkyard, but it didn't fit. the car was on a ramp, but i just couldn't get it to clear some lines on the chassis. would the one i tried be the 24mm one or the 15mm one?
Updated sway bar listings. If anybody has any others post them up!!
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks