Forum: Suspension | Wheels | Tires

so i've recently bought an 02 ep3. before i bought it he told me that the steering rack and pinion needed to be replaced. told me it was a cheap fix so i took his word for it. been doing some research on google and i cant find anything. any help? should i just take it to a shop and have them...

Hey guys looking for some help, I have a slight clicking in the front end near my tie rod ends. It happens on certain turning degrees, but only when I'm turning. Could it be the tie rods are shot? Just got the axles replaced, and it's nowhere near the loudness of a busted axle. Sounds hillarious...

well guys its time to ditch my 16's and move on up. i want to get steel gray 17x8 +35 Rota Boost's. But what do i need to do to run that offset? a little negative camber, some fender rolling? anyone have any pics of wheels on ep's with that size and offset? also what would be a good size tire?...

Will a 17x8 offset of +28 with 235 45/17 tires stick out or will it sit flush with the wheel wells or would the 17x8 offset +42 sit a little more flush with the car.

What is needed to fit them with a +30 offset. I got the fenders rolled and a good camber kit and megan coils.

hey guys, i need some help with installing the rear sway bar. So my situation is i screwed the 4 12mm screws to secure the bar to the body of the car, but 3 of the 4 broke off. The 14mm ones on the ends are okay they are secure. But what could I do to fix this? Could i take it a machine...

i dont know what my car is doing? i just replaced both of my front drive axles and thought that was the problem, but its not. my problem is a horrendous clicking/knocking/tearing noise when i turn right and when i stomp on it in first or second gear? my mechanics said it was my drive axles, so i...

So at this point in the game I am still looking for rims. I found a nice pair of rims that are 18 in 5spokes. The seem pretty nice and I can get them for 200. I just want to know if 18s are too big or not, so if you guys have pictures of ep3s on 18s feel free to post them. I'm also dropping my car...

What are you guys with slips using as center caps? Does anyone know the size of them? I hate the rota centercaps!

I just recieved my skunk2 lower arm bar from another ephatcher, and the bolts thats go through the control arm end bushings, they dont fit into the original thread pattern on the car? the bolts that i got with the skunk2 lower arm bar are much smaller (in thickness) than the original bolts on the...

Hi, im currently runing in a track event. My current setup is almost stock: progress springs front camber bolts rear SPC camber arms rear progress sway bar (22mm) with tie bar hawk hps brake pads OBX RH K pro

Hey guys, just as the title says, my e brake light won't turn off, however it still is fully functional I'd really just not have that damn light on all the time! Thanks in advance. If it matters: 02 Civic SiR (Canadian) no big upgrades that would have any effect on this.

hey guys im thinking of dropping the ep. im a college student so money is always an issue and im looking for a cheap but effective/safe way to drop the ep w/o running into problems. im between springs and coilovers. although coilovers are much more expensive in general ive heard good things about...

Looks like another version of racelands, except more expensive. Soo, anyone got these? http://www.vexmotorsports.com/NNR--Full-Body-Coilovers--Honda-Civic-2002-2005-SI-EP3_p_7425.html http://www.vexmotorsports.com/assets/images/nnr/coilovers/honda/hondacivicep3coilovers.jpg

Hello does any body have info on a Front/Rear shock install DIY having trouble removing rears with ease please let me know thanks.

Its like every site I look on I get a different rate on these springs. Is it an average drop of 2" or 1.5" I'm trying to decide between h&r sport and the skunk 2. I'd like to have a 2" drop with a stiff spring

Hey guys I was wondering what is a cheap and reliable camber kit.

Hey guys I was wondering what sizes are the 03 ep3's break pads. I was thinking on getting some Hawks Performance.

Finally scored an extra set of wheels for my ep3! Thanks to Benito for a great deal on his extra RSX wheels! I was set to paint them but got a very reasonable powder coating bid and couldn't resist. I also picked up a new pair of Toyo r1r's so now I have a full set on my now 10 lbs. lighter per...

So I got my coilovers installed. I know, they aren't the best, and "if you go too low it'll throw everything off". That being said, my rears arent going low enough. The height adjustment is maxed out and its only like a 1-1.5in drop. Anyone else have this problem? any way i cn go lower?